Phidget IR.lvlib:IRTransmitRaw.vi

Transmits raw data as a series of pulses and spaces.

data must start and end with a pulse.
- Each element is a positive time in μs
dataLength has a maximum length of 200, however, streams should be kept must shorter than this (less than 100ms between gaps).

dataLength must be an odd number

Leave carrierFrequency as 0 for default.

carrierFrequency has a range of 10kHz - 1MHz

Leave dutyCycle as 0 for default

dutyCycle can have a value between 0.1 and 0.5

Specifying a gap will guarantee a gap time (no transmitting) after data is sent.

gap time is in μs
gap time can be set to 0

Phidget IR.lvlib:IRTransmitRaw.vi

Device Support:

1055_0 (ver: 100, 101) IR Receiver Transmitter : Supported

cu64

Device In

Device # Identification

cerrcodeclst

error in (no error)

error in can accept error information wired from VIs previously called.

cbool

status

status is TRUE (X) if an error occurred or FALSE (checkmark) to indicate a warning or that no error occurred.

Right-click the error in control on the front panel and select Explain Error or Explain Warning from the shortcut menu for more information about the error.

ci32

code

code is the error or warning code.

Right-click the error in control on the front panel and select Explain Error or Explain Warning from the shortcut menu for more information about the error.

cstr

source

source describes the origin of the error or warning.

Right-click the error in control on the front panel and select Explain Error or Explain Warning from the shortcut menu for more information about the error.

cu32

carrierFrequency

carrier frequency in Hz

cdbl

dutyCycle

the duty cycle

cu32

gap

the gap time in μs

c1du32

Data

data to send.

cu32

Data

Data

iu64

Device Out

Same as Device In

ierrcodeclst

error out

error out passes error or warning information out of a VI to be used by other VIs.

ibool

status

status is TRUE (X) if an error occurred or FALSE (checkmark) to indicate a warning or that no error occurred.

Right-click the error out control on the front panel and select Explain Error or Explain Warning from the shortcut menu for more information about the error.

ii32

code

code is the error or warning code.

Right-click the error out control on the front panel and select Explain Error or Explain Warning from the shortcut menu for more information about the error.

istr

source

source describes the origin of the error or warning.

Right-click the error out control on the front panel and select Explain Error or Explain Warning from the shortcut menu for more information about the error.